Small knowledge of buckle commonly used in outdoor products

The following are some commonly used buckles for backpacks, and we cite their advantages, disadvantages and application areas.

The invisible buckle is characterized by a large pressing area, which makes it easy to work even when wearing gloves. It is usually used on the waist belt of the backpack, the fixing belt on the front of the head bag, and the chest strap. However, its structural limitations make it impossible for the male buckle to easily discharge it when snow or other debris accumulates inside the female buckle. In addition, the male buckle and the female buckle may occasionally be misaligned when they are mated.

It is generally believed that the lobster buckle is a replacement product of the invisible buckle. In addition to the slightly insufficient pressing area, its overall strength and the ability to remove the internal debris of the female buckle are significantly enhanced, and it can be competent in a more difficult environment. In addition, the circular arc closing of the head of the male buckle makes it possible to completely avoid the phenomenon of misalignment when it is mated with the female buckle.

Although the pressing area of ​​the lobster buckle is slightly insufficient, it is not obvious in the buckle above 25mm, but for the buckle below 25mm, there will be obvious inconvenience when wearing gloves. To improve this situation, DURAFLEX has produced an easy-to-plug lobster buckle. The auxiliary buttons on both sides of the buckle can be easily pressed when wearing gloves. But considering the firmness of the fixation, this buckle is currently only used in the chest strap position.

Considering that the female buckle is usually fixed on the backpack by machine stitching, and its shape is easy to be stepped on, DURAFLEX specially designed this kind of replacement lobster female buckle, so that the problem can be solved when climbing!

Rotating buckle is used when it needs to withstand forces in different directions, and the round button with a large male buckle can be used conveniently for occasions with thick gloves. This feature allows this hook to be used to tighten the waist of the ski suit.

Standard Mohabi ladder buckle is widely used to tighten backpack shoulder straps and side straps. Its characteristic is that when the tightening webbing and the ladder buckle plane coincide, the webbing is in a self-locking state and is not easy to loosen. When the head of the ladder buckle is raised, the webbing will automatically loosen.

The 　　 duckbill ladder is more advanced than the Mohabi ladder buckle. In addition to the self-locking function, the nail shape of the ladder buckle head is more convenient to relax the webbing. If the gloves are too heavy, you can choose this duckbill ladder buckle with holes, which can be easily pulled by attaching a small rope to the hole, which is very effective!

E-mail :
hajw888@163.com、anita@jianhuiplastic.com

Phone/WhatsApp：
+86-595-87302580

Skype:
anitayan2010

Address：
Chengnan Industrial Zone, Hui'an County, Quanzhou City, Fujian Province, China